Transformer for LUMONITE Lamp fixture (Enduro)

Lumonite Lamp armature can now be used with 12 volt electrical system. Perfect for enduro or as extra light on the quad bike or scooter.

With this transformer you can use Lumonite lamps directly from a 12V electrical system. With this accessory and the Lumonite Leader or Navigator lamp, the night is always young! A 10A fuse is included with the transformer. Plus & minus cable connects to the power source, usually your vehicle's 12V battery. The lamp is then connected directly to the contact output of the transformer. The contact for the lamp is of high quality incl. such a one is called a flip-flop.

Characteristics

• Product: Lumonite D-moto Transformer 12V
• Application: Power a Lumonite lamp from a 12V battery
• Voltage input: 12 - 17V
• Voltage out: 19V +- 0.2V
• Max. current output: 3A
• Max power: 57 W
• Cable length plus % minus: approx. 50 cm
• Cable length power connector: 100 cm
• High quality transformer
• Waterproof construction

Examples of areas of use

• ATV auxiliary light
• Enduro / Motocross / Motorcycle / Scooter / Helmet lamp or similar where power is obtained directly from the vehicle
• Small additional lights for all vehicles with 12V electrical system
• Searchlight on boat
• Work lighting with requirements for compact format and high performance

Quick guide

Connection to power source:
Red: plus (+) Black: minus (-). The Lumonite lamp fixture connects to the black connector. Attach the transformer itself to your vehicle with, for example, screws or double-sided tape.

NOTE! We recommend installing a separate on/off switch in the power cord, which can be used to ensure that the transformer does not consume the battery when it is not in use.

Note! This product requires basic electrical knowledge. A few reminders:

• Connect the transformer together with an appropriate size fuse
• If necessary, use a relay or proper circuit breaker
• Make sure to take proper cables that last and are of high quality
• If installing the unit behind an existing fuse - make sure the fuse is sufficient
• If you need a longer cord between the transformer and the lamp fixture - Use Lumonite original extension cords. Many other cords are not thick enough
• Lumonite DX extension cord found here!

Use a high quality switch to control the lighting. In certain installations, a relay can work better - Then you can e.g. connect the lighting to the vehicle's existing light switch.

Compatible with

• LUMONITE DX5000 lamp fixture

Available accessories