Leader

Eero Remes (three-time enduro world champion) on Lumonite Leader:

"In Enduro, the requirements for a racing lamp are brightness, a long and wide reaching beam and light weight. In this kit they are all standard! Incredible brightness in such a compact packet. The light is conveniently attached to the helmet with the Gopro bracket, so it is easy to install and remove if necessary! Battery life is good. I can recommend this light set for both amateurs and racers!!"

Motorsport/helmet light package composed of the most powerful LUMONITE® DX6500 lamp on the market that guarantees power and reach! A DX6500 lamp produces a whopping 6838 lumens (measured in Valostore's laboratory). If the DX6500 is mounted in pairs, an astonishing effect of up to 13,676 lumens is achieved! This amount of light, combined with precision machined reflector optics, illuminates the terrain in a way never seen before. The Gopro-compatible lamp head of the highest quality provides an all-encompassing light image that shines both far and wide. The DX6500 has a range of up to 388 meters, and its diffuse light spreads the light beam more than 180°. In this way, dark spots or the so-called tunnel vision effect are not created, but the entire field of vision is illuminated. Note The helmet is not included in the set.

"In Enduro, the requirements for a light are brightness, a long and wide reach and low weight. In this package, they are all standard! Incredible brightness in such a compact package. The light is conveniently attached to the helmet with the Gopro mount, so it is easy to install and remove when needed! Battery life is good. I can recommend this light set for amateurs and racers alike!!"

We put together high-quality and area-specific packages of the components found in our selection, this enables a suitable use for the needs of motorsport practitioners. The packages equipped with original LUMONITEⓇ Slimcore 100 batteries allow maximum luminous flux to be achieved up to 2 hours. The battery-powered package is available with both one and two lights. In addition, a package is available (or purchased as an accessory) with a 12 V transformer, which allows the lamp to be powered directly from a 12 V system. DX6500, also called LUMONITE Leader created for situations where absolute maximum performance, i.e. maximum light flux, is required.

Note! A high-quality, cast-steel GoPro adapter (and a 360°, GoPro-compatible tripod) is included, which makes it easy to attach the light to, for example, a helmet. The mount can be adjusted both vertically and laterally. Depending on the package, the unit is supplied with 1 or 2 pieces of 50 and 120 cm extension cords, which means that the lamp can be used in, for example, a helmet. Additionally, cable mounts are included for mounting needs based on package. Thanks to the GoPro adapter attached to the light, the light can be attached to any GoPro-compatible mount, so the attachment possibilities are practically unlimited! This unmatched efficiency, complete lighting set offers countless uses, allowing you to enjoy your hobby even after dark!

Lumonite DX series lamps are easy to use. The lamp is switched on by using the switch on the top of the lamp. Then a button press switches between the effect modes in the order low-med-high. The maximum mode is activated with a simple double click. Double-click again to return to the previous effect mode.

Note! The transformer package is delivered with an ON/OFF switch . When connected to a lamp, the transformer consumes some current even when the lamp is off, so during long storage it can drain the vehicle's battery if the transformer is connected directly to the battery. Therefore, you should install a circuit breaker in between. The best solution is, of course, to connect the transformer directly to e.g. the vehicle's fuse box or other place where the current is interrupted when the vehicle is switched off and the battery is not discharged.

User manual in PDF format: Lumonite Leader user manual (opens in new window) PDF