Navigator2

The battery is equipped with a charge indicator in five stages

The included Lumonite Slimcore lithium-ion battery provides an operating time between 3 and 48 hours depending on the power mode. It can be attached with the innovative Slimholder attachment in e.g. the belt or the bicycle frame, and the sturdy aluminum case protects from impacts. There is a five-scale indicator in the battery which, with the push of a button, reveals how much of the battery's charge remains. The battery also contains a smart function that does not turn off the light completely when the battery runs out, but gradually lowers the brightness - so you never have to get lost in the dark. You can easily charge the battery via USB-C charging port that's built in to the battery.

Valostore's satisfied customer guarantee - order and test in real conditions of use. Free return if you are not satisfied!

The Lumonite DX3500 light fixture is designed to be able to deliver continuous power, therefore maximum cooling capacity is required. This is achieved by large parts of the lamp being covered by efficient cooling fins. The fixture is made from a single piece of aluminum to ensure maximum heat dissipation. It is also equipped with advanced heat-regulating electronics, which actively monitors the temperature in the lamp. This is to be able to keep the light intensity as high as possible at all times under all conditions.

One of the features of the Lumonite DX3500 light fixture is that it does not allow you to run out of battery at the highest power setting, even if it were technically possible. When the battery starts to run down, the highest power setting would cause it to run out completely in just a few minutes, but with a lower power setting, you can get much longer burn time out of the lamp. When the "official" burning time is over, the lamp also continues to shine with a luminous flux of approx. 250 lumens for over an hour. This lamp will not leave you stranded when the battery runs out!

The Lumonite DX series is easy to use – the lamp is switched on using the switch on the top of the lamp fixture. After that, a simple press of the power switch makes you switch between the different power modes: low – medium – high. The maximum mode is activated with a simple double click. Double-click again to return to the previous effect mode.

Note! The transformer package is delivered with an ON/OFF switch . When connected to a lamp, the transformer consumes some current even when the lamp is off, so during long storage it can drain the vehicle's battery if the transformer is connected directly to the battery. Therefore, you should install a circuit breaker in between. The best solution is, of course, to connect the transformer directly to e.g. the vehicle's fuse box or other place where the current is interrupted when the vehicle is switched off and the battery is not discharged.