Leader

Eero Remes (three-time enduro world champion) from Lumonite Leader:

"In Enduro, the requirements for a racing lamp are brightness, a long and wide reaching beam and light weight. In this kit they are all standard! Incredible brightness in such a compact packet. The light is conveniently attached to the helmet with the Gopro bracket, so it is easy to install and remove if necessary! Battery life is good. I can recommend this light set for both amateurs and racers!!"

The battery is equipped with a charge indicator in five stages

The packages are based on the LUMONITES® DX6500 lamp, which guarantees power and range! A DX6500 lamp produces a whopping 6838 lumens (measured in Valostore's light laboratory). With a set of two lamps, a shocking luminous flux of up to 13,676 measured lumens is achieved. This amount of light, combined with precision machined reflector optics, illuminates the terrain in a way never seen before. The top-quality GoPro-compatible helmet mount enables a range of up to 388 meters. The diffuse light created by the lamp provides a wide and comprehensive light image of over 180°, which means that the driver's entire field of vision is illuminated without any dark areas. The helmet is not included in the package.

Note! If you are looking for a smaller but affordable light package for your helmet, you should take a look at the Snowmobile light/helmet light LUMONITE Navigator2 (DX3500)

The lamp can either be attached to a helmet or to the snowmobile, for example on the hood to act as a super efficient additional light. With the included GoPro-compatible mount, endless motoring possibilities are created, but can be advantageously mounted on the helmet. By mounting the lamp on the helmet, the light can always follow the direction of the eye, and in this way there is always light where it is needed. This gives the driver better conditions to react and plan his driving. In addition, you get lighting outside the scooter's own lights, e.g. when you turn your head backwards or sideways. Of course, the same light works not only for scooter riding, but also for enduro, motocross, off-road or downhill cycling, etc.

Lumonite DX series lamps are easy to use. The lamp is switched on by using the switch on the top of the lamp. Then a button press switches between the effect modes in the order low-med-high. The maximum mode is activated with a simple double click. Double-click again to return to the previous effect mode.

Note! The transformer package is delivered with an ON/OFF switch . When connected to a lamp, the transformer consumes some current even when the lamp is off, so during long storage it can drain the vehicle's battery if the transformer is connected directly to the battery. Therefore, you should install a circuit breaker in between. The best solution is, of course, to connect the transformer directly to e.g. the vehicle's fuse box or other place where the current is interrupted when the vehicle is switched off and the battery is not discharged.

User manual in PDF format: Lumonite DX6500 Manual (opens in new window) PDF